Rycom Instruments® Utility Locators - Accurate Utility Locating Made Simple

Locators By Industry

  Telco/CATV
  Power T&D
  Water, Sewer, Plumbing
  Gas & LPNG Transmission
  Survey and Construction

Directional Fault and Cable Locators

8880-DFF >>>

Line and Cable Locators

  8879-RF/CP >>>
  8869 >>>
  8856-1w >>>
  8831 >>>

Pipe and Sonde Locators

  8846-SD >>>
  8872-SD >>>
  Sonde Transmitters >>>

Inspection Cameras

  RI-800 >>>
  RI-1100 >>>
  RI-1200 >>>

Utility Marker Locators

8890-MP >>>

Ferrous Metal Locators

Magnastick MS-101/102 >>>

Geo-Phone Leak Detectors

LD-8000 >>>

8872-SD shown
with Optional 1 watt Transmitter

Multi-frequency digital receiver locates sondes and inspection camera heads up to 20 feet away and 10 feet in cast iron.

	2 active frequencies (512 Hz and 51 kHz) allow accurate tracing of sondes, pipes and inspection cameras		Single 50/60 Hz frequency locates live utilities without the use of a transmitter
	Backlit digital display for low-light reading		Push button depth accurate up to 15 feet
	Locate Sondes up to 10 feet in cast iron		Weather proof membrane buttons
	Made in the U.S.A.

The 8872-SD cable, pipe, camera and Sonde locator offers two active frequencies -- 512 Hz, 51 kHz -- ensuring the ability to track any manufacturer's camera or Sonde system operating on 512 Hz. Rycom Instruments® Sondes can be used to locate pinches and blocks in non-pressurized conduits and pipes. Sonde frequencies are matched to the frequency of the receiver. Sondes at all frequencies will trace through conduit up to 20 feet in the air or 10 feet in cast iron.

Passive frequencies identify "live" and charged power lines by their naturally occurring electromagnetic fields. The 8872-SD offers 1 passive frequency - 50/60 cycles - allowing line locating without the use of a transmitter.

Simple to operate, the ergonomically designed and balanced 8872-SD receiver pinpoints inspection cameras, and Sondes in nonmetallic conduits in a peak mode. A large backlit digital display provides both relative and actual signal strength while a variable tone pitch gives an audio indication to the signal. The triple antennae configuration provides push-button depth accurate up to 15 feet and works in a peak, pin-point peak and null modes when used with a transmitter.

Whether locating water lines, sewer lines, inspection cameras, or Sondes, this is an economical and dependable locator for companies of all sizes.

Rycom Instruments®, Inc. locators are designed and manufactured to make utility locating as accurate as you need and as simple as you want. For more information on the 8872-SD/1W, or any other Rycom Instruments® locator, please contact your local dealer or call us toll free at 1-800-851-7347.

8872-SD Manual and Specification Downloads
Download the 8872-SD Technical Data Sheet	Download the 8872-1w Technical Data Sheet	Download the 8872 Operating Manual

Locators and Products By Industry
Cable, Metal and Marker Locators for Power and Communications	Multi Frequency Digital and Analog Line Locators 8880-DFF \| 8879-RF/CP \| 8869 \| 8856-1w \| 8831 Magnastick 101/102 \| 8890-MP

Pipe, Sonde and Leak Locators for Plumbing, Sewer and Gas	Multi Frequency Digital and Analog Pipe Locators and Leak Locators 8872-SD \| 8872-1w \| 8846-SD \| LD-8000

Inspection Cameras for 3" to 8" Pipes	Color and B&W Cameras with LCD Screens and Digital Recorders RI-800 \| RI-1100/VHS \| RI-1200/DVD

Linemen's Tools for Power Transmission and Distribution	The Origo Phase Identification System Identifies all 12 Power Phase Attributes From the Field Without Cell Phones \| Origo Phase Identification System \|

Rycom Instruments® is proud to support these professional organizations.


Locators and Accessories \| Buy a Rycom Locator \| Service Downloads \| Contact \| MyRycom Dealer Login \| Site Map Home Page Rycom Instruments®, Inc. 9351 East 59th Street, Raytown, MO 64133 800-851-7347 FAX: 816-353-5050 E-mail: rycom@rycominstruments.com © 2006 Rycom Instruments®, Inc. All Rights Reserved